Tusig

Quality

Quality approach

Clear requirements. Defined configurations.

Product quality starts with knowing which model and configuration an application requires. Tusig Electric brings the inquiry back to the operating function, installation conditions and documented product information before a selection is approved.

5S management

The manufacturing operation identifies 5S management as part of its workplace and production approach. This is a management practice, not a product certification or a substitute for a model’s technical documentation.

Standardized workflows

Standardized process workflows support the manufacturing operation. For a custom request, the agreed drawing or configuration provides the reference for discussing the required product.

Product inspection

Product inspection is part of the stated manufacturing approach. Inspection requirements for an order should be agreed against the selected model and the customer’s specification.

Review the information that affects your selection

Use the complete model designation when requesting technical details. Check the mounting arrangement, contact configuration, operating action and illumination requirements that apply to the product. Where an environmental or electrical rating is required, ask for the documentation for the exact offered version.

For a sample or custom design, identify the differences from the standard configuration. Keep the drawing reference, requested changes and acceptance requirements together so the review is based on one agreed description.

Before approvalInformation to agree
Model selectionComplete designation and intended function
InstallationMounting dimensions and connection requirements
Technical requirementsRelevant ratings and supporting information for the offered version
Custom configurationDrawing or sample reference and requested differences
Order reviewQuantity and any inspection requirements to be agreed

Documentation for your project

If your project needs a specific certificate, test report or inspection arrangement, include that requirement with the model and application. Availability and applicability must be confirmed for the proposed product before an approval decision is made.

No certification badges or blanket compliance claims are presented here. Contact Tusig Electric with the documentation requirements for your inquiry.

Project details

Fields marked * are required.

Your details will be used to respond to your enquiry.